Tabletop type

For this type, L-shape bending processing is performed for products to be easily placed on desks, tables, shelves or chests, and this type is not to be hanged on a wall.

Products of this type are made from a single metal plate. No other materials are used. This is the most simple photo presentation method.

Since this type does not require installation work, it is suitable to give as a gift if the person receiving it will likely place it on a tabletop, or hang it on a wall - for instance, if you are not sure whether they can attach it to a wall.

This type is good for small sized products, and products of this type will become unstable at larger sizes.

Image circumference processing

We recommend a cut-off which leaves no margin, as shown in the illustration, because this makes the image appear larger. With this processing, three sides - the left, right, and top -will have no margin, and the bottom will have a black margin or gradation margin. It is also possible to have a black or gradation margin on all four sides. A pattern margin is also available.

Please also select the Photo background pattern.

Installation method

There is no particular specified installation method for this product. Products of this type can be placed on any solid flat surface.

If you are concerned about the possibility that the product may scratch a glass table, piano, or other surface that is easy to damage, we can deliver a product with a protective sheet attached to it (free of charge). However, if a strong load is applied on the corner of the product when placed on such a surface, even if the product has a protective sheet on it, this may result in the surface becoming damaged. The protective sheet is a simple protective method, and; therefore, we do not guarantee that it will protect all surfaces from damage.

With large products, there is a concern over them falling over, so we recommend employing the round hole plus bolts or round hole plus anchor bolts method to firmly fix the product to a given place by drilling holes in the base surface.